This flooring system is engineered for permanent outdoor padel courts subjected to frequent play and variable weather conditions.
It consists of a layered polymer composite that combines a wear‑resistant top surface with a shock‑absorbing base layer, providing consistent ball rebound and player comfort.
The top layer is formulated with UV‑stabilized polypropylene granules, achieving a surface hardness of 85 Shore A and a coefficient of friction between 0.55 and 0.65 under wet conditions.
Overall thickness ranges from 12 mm to 18 mm, with a base layer density of 0.95 g/cm³ that delivers a vertical deformation of 2.5 mm ±0.3 mm under a 500 N impact.
Drainage channels molded into the base allow water evacuation at a rate of 150 mm/h, preventing surface pooling during heavy rain.
| Property | Typical Value | Unit | Note |
|---|---|---|---|
| Abrasion resistance (Taber) | ≤150 mg loss after 1000 cycles | mg | CS‑10 wheels, 1 kg load |
| Tensile strength | ≥2.5 | MPa | ASTM D638 |
| UV stability (color change) | ΔE ≤ 3 after 1500 h | CIELAB | Q‑UV accelerated |
| Shock absorption | 30 % ±5 % | % | ASTM F2569 |
Outdoor padel courts require a surface that maintains playability despite temperature swings, UV exposure, and periodic water accumulation.
The flooring’s UV‑stable top layer prevents fading and surface embrittlement, while its integrated drainage reduces slip hazards after rain.
These attributes make the product appropriate for club facilities, school sports complexes, and residential community courts where long‑term performance and low maintenance are priorities.
Thickness can be adjusted between 12 mm and 18 mm to match specific load‑bearing requirements and budget constraints.
Surface color is available in standard RAL shades (e.g., RAL 3020, RAL 6018) or custom pigments upon request, allowing visual integration with surrounding architecture.
Interlocking edge profiles include male‑female tabs for roll‑to‑roll installation or a perimeter‑glue system for permanent fixation.

| Option | Available Values | Remarks |
|---|---|---|
| Thickness | 12 mm, 15 mm, 18 mm | Custom thicknesses available upon engineering review |
| Color | RAL 3020 (traffic red), RAL 6018 (yellow green), RAL 7016 (anthracite grey) | Custom color matching possible with pigment batch |
| Edge profile | Interlocking tab, straight edge, beveled edge | Selection affects installation method and joint visibility |
Manufacturing follows ISO 9001 procedures with in‑line monitoring of granule size distribution and extrusion temperature to ensure consistent material properties.
Finished rolls undergo random sampling for abrasion loss, tensile elongation, and UV resistance; results are recorded against internal control limits before release.
Documentation includes material safety data sheets (MSDS), test certificates, and installation guidelines that detail sub‑base preparation and seam treatment.
The flooring is supplied in rolls of 2 m width and lengths up to 25 m, wrapped in protective polyethylene film and placed on sturdy pallets.
Each pallet accommodates approximately 20 m² of product, facilitating efficient container loading and minimizing handling damage.
Shipment options include FOB Ningbo or CIF destination ports, with export documentation compliant with international trade regulations.
Can dimensions be customized?
Yes, roll length and width can be adjusted to match court layout; custom thicknesses require a minimum order quantity.
What information is required before quotation?
Project area, desired thickness, color preference, edge profile, and delivery address enable an accurate cost estimate.
How is quality inspected?
Each batch undergoes abrasion, tensile, UV, and drainage tests; results are traceable via lot numbers.
What packaging methods are available?
Standard packaging is roll‑film plus pallet; optional crate packaging is offered for high‑value or delicate shipments.
What is the typical production lead time?
Lead time ranges from 15 to 25 working days after receipt of confirmed purchase order, depending on customization complexity.
For detailed technical data sheets, sample requests, or project‑specific pricing, please contact our sales team.
Request Technical Specification Sheet