These courts combine a reinforced polymer base with a textured acrylic top layer to deliver consistent ball bounce and player traction under varying weather conditions. The modular panel design allows rapid installation on existing asphalt, concrete, or compacted gravel substrates.
Each panel measures 1.2 m × 2.4 m with a nominal thickness of 25 mm, comprising a 15 mm high‑density polyethylene core and a 10 mm UV‑stabilized acrylic wearing surface.
Interlocking edges feature a dovetail profile that resists lateral displacement under loads up to 5 kN per panel, while a peripheral drainage groove channels water at a rate of 2 L/min per meter of edge.
| Layer | Standard Option | Alternative |
|---|---|---|
| Core | High‑density polyethylene (HDPE) – 0.95 g/cm³ | Recycled polypropylen‑blend – 0.90 g/cm³ (available upon request) |
| Wearing Surface | UV‑stabilized acrylic – 1.18 g/cm³, 10 mm thickness | Polyurethane‑modified acrylic – enhanced abrasion resistance, 12 mm thickness |
| Edge Seal | EPDM rubber extrusion – 5 mm × 10 mm profile | Silicone‑based seal – improved UV stability for desert climates |

Court dimensions can be adjusted in increments of 0.3 m to suit site‑specific layouts, with a maximum continuous span of 12 m before requiring a structural support beam.
Line markings are applied using UV‑curable epoxy inks, offering a contrast ratio of at least 4.5:1 against the base color for compliance with USAPA and FIBA standards.
Optional shock‑pad underlayment (10 mm recycled rubber) reduces peak impact forces by up to 18 %, beneficial for multi‑use facilities hosting both sports.
Each production lot undergoes dimensional verification (± 1 mm tolerance on panel length and width) and surface hardness testing (Shore D 80 ± 2) before release.
Accelerated weathering cycles (UV‑B 0.8 W/m², 8 h exposure per day) for 1000 hours confirm less than 5 % loss in gloss and no delamination.
Final inspection includes slip‑resistance measurement via British Pendulum Test, targeting a minimum value of 45 (wet) and 55 (dry).
Facilities that require rapid conversion between pickleball and basketball benefit from the interchangeable surface texture, which maintains optimal ball response for both sports without resurfacing.
School districts, municipal recreation centers, and private clubs utilize these courts to extend playing seasons, as the drainage design prevents standing water and the UV‑stable surface resists fading under prolonged sun exposure.
Temporary event installations, such as tournament grounds, rely on the modular locking system to achieve a stable playing area within four hours, with load distribution suitable for portable sub‑bases.
Yes, panels can be trimmed or combined to achieve custom lengths and widths in 0.3 m increments, subject to a minimum order of 20 sqm.
Site plan showing intended court area, sub‑base condition, and any required line‑marking specifications (color, width, sport).
Standard UV‑stabilized acrylic; optional polyurethane‑modified acrylic for enhanced abrasion resistance; both available in multiple colors.
Dimensional checks, hardness testing, accelerated weathering, and slip‑resistance testing are performed per lot before shipment.
Panels are stacked on pallets with edge protectors and shrink‑wrapped; custom crating available for overseas container shipments.
Pallets are fitted with corner boards, moisture‑barrier film, and straps compliant with ISPM‑15 standards.
Four to six weeks after receipt of approved technical drawings and deposit, depending on order size and customization level.
Sample panels (1 m × 1 m) can be dispatched via express courier upon receipt of a request and a refundable deposit.
Provide your project dimensions, sub‑base details, and any specific performance requirements to receive a detailed quotation and lead‑time estimate.
Request Quote