Maple (Acer saccharum) is a dense, closed‑grain hardwood that exhibits a Janka hardness rating around 1450 lbf, providing excellent resistance to impact and wear.
When manufactured as sports flooring, the boards are typically milled to a uniform thickness of 22 mm, with a wear layer of at least 3 mm to allow multiple sand‑and‑refinish cycles over a service life exceeding 25 years in high‑traffic indoor facilities.
The moisture content is kiln‑dried to 6‑8 % before milling, which minimizes dimensional change under the temperature and humidity variations common in gymnasiums and multipurpose halls.
A factory‑applied UV‑cured polyurethane finish adds a slip‑resistant coefficient of friction (COF) between 0.6 and 0.8, meeting ASTM F2913 standards for athletic surfaces.
| Property | Typical Value | Notes |
|---|---|---|
| Thickness | 22 mm | Includes 3 mm wear layer |
| Width | 60 mm – 100 mm | Custom widths available |
| Length | 1.8 m – 2.4 m | Random lengths for staggered joints |
| Janka Hardness | ≈1450 lbf | Indicates wear resistance |
| Moisture Content | 6‑8 % | Kiln‑dried |
| Finish COF | 0.6‑0.8 | UV‑cured polyurethane |
Sports facilities require flooring that combines shock absorption, ball rebound consistency, and surface durability; maple’s natural elasticity provides a vertical deformation of approximately 2.0 mm under a 500 N load, which helps reduce athlete fatigue while maintaining consistent basketball bounce.
Each batch undergoes three‑point bending tests, surface roughness measurement, and finish adhesion testing per ISO 2409 to ensure compliance with project specifications. Dimensional checks are performed on every board using laser‑guided gauges to maintain tolerance within ±0.2 mm.
Yes, the standard offering includes a factory‑applied UV‑cured polyurethane finish; alternative finishes can be arranged upon request.
Required details include total area, desired board width and length, finish type, edge profile, delivery location, and any project‑specific performance standards.