The flooring is produced from select northern hardwood species, primarily maple (Acer saccharum) and birch (Betula spp.), sourced from sustainably managed forests. These species exhibit a Janka hardness rating between 1450 lbf (maple) and 1260 lbf (birch), providing resistance to indentation from basketball equipment and player traffic.
Each board is kiln-dried to a target moisture content of 6%–8% equilibrium, matching typical indoor gymnasium conditions. This range minimizes seasonal expansion and contraction, keeping dimensional change under 0.15% across the width of a 2.25‑inch strip.
A factory‑applied polyurethane coating system delivers a nominal dry film thickness of 45 µm, measured by DFT gauge. The finish provides a Taber Abrasion Index of ≤80 mg loss per 1000 cycles under CS‑10 wheels, suitable for high‑impact court sports.
Manufacturing runs can adjust board width, length, and finish gloss level to match specific court layouts or branding requirements.
The product is installed in indoor basketball venues where consistent ball bounce and player traction are critical. Its hardness and finish maintain a coefficient of restitution (COR) of approximately 0.85 for a standard basketball, meeting FIBA performance criteria.
Each batch undergoes inline moisture measurement, thickness gauging, and surface roughness (Ra) testing. Finished panels are inspected for coating uniformity using UV fluorescence, with acceptance criteria of ≤5 % variation in gloss across a 1 m² area.
| Parameter | Typical Value | Notes |
|---|---|---|
| Species | Maple (Acer saccharum) | Primary; birch available on request |
| Janka Hardness | 1450 lbf (maple) | Indicates resistance to indentation |
| Nominal Thickness | 20 mm | ±0.2 mm tolerance |
| Width Options | 50 mm – 100 mm | Custom widths available |
| Moisture Content (MC) | 6%–8% | Equilibrium for indoor gyms |
| Finish Dry Film Thickness | 45 µm | Polyurethane system |
| Taber Abrasion (CS‑10) | ≤80 mg/1000 cycles | Wear resistance metric |
| Coefficient of Restitution (COR) | ≈0.85 | Meets FIBA basketball bounce |
To receive a project‑specific quotation, provide the court dimensions, desired board width, finish gloss, and any logo inset requirements. Our engineering team will return a detailed submittal package including shop drawings, material certificates, and installation guidelines within three business days.