Natural hard maple sourced from sustainably managed forests provides a dense, uniform grain structure suitable for high-impact sports surfaces.
Hard maple (Acer saccharum) exhibits a Janka hardness rating around 1,450 lbf, indicating resistance to denting and wear under repeated athletic loads.
The wood's specific gravity averages 0.63, contributing to stable dimensional behavior when acclimated to indoor humidity levels between 40% and 60%.
Logs are sawn into quartersawn boards to minimize tangential movement and enhance surface stability.
Each board undergoes kiln drying to a target moisture content of 6%–8%, followed by precision planing to achieve a uniform thickness tolerance of ±0.1 mm.
Surface finishing options include a UV‑cured polyurethane coating that adds abrasion resistance while maintaining a low gloss finish suitable for court markings.
| Property | Typical Value | Test Standard |
|---|---|---|
| Janka Hardness | 1,450 lbf | ASTM D143 |
| Modulus of Elasticity | 1.8 GPa | ASTM D143 |
| Density | 0.63 g/cm³ | ASTM D2395 |
| Coefficient of Friction (dry) | 0.6–0.8 | ASTM F2772 |
| Shock Absorption | ≥25% | ASTM F2772 |

Values represent averages from production lots; actual performance can be verified per project via material test certificates.
Sports flooring made from hard maple is favored in environments where ball rebound consistency and athlete traction are critical.
The natural light color of maple enhances visibility of court markings, reducing the need for high‑contrast paints.
Each batch undergoes visual inspection for grain consistency, knots, and surface defects before grading.
Dimensional checks are performed on random samples using calibrated calipers to verify thickness, width, and length tolerances.
Finished boards are subjected to abrasion resistance testing per ASTM D4060 to ensure coating durability meets sport‑floor requirements.
Documentation includes a material test report (MTR) and a certificate of conformity for each shipment.
Thickness can be adjusted from 18 mm to 25 mm to suit subfloor systems and load expectations.
Width options include standard 3‑inch planks or custom 5‑inch wide strips for seamless installation.
Edge profiling choices consist of square, eased, or micro‑beveled edges to accommodate different fastening methods.
Coating systems range from matte polyurethane to low‑VOC water‑based finishes, with optional line‑painting pre‑application for court markings.
Boards are stacked in layers separated by polyethylene sheeting to prevent moisture transfer during transit.
Each pallet is secured with steel straps and corner protectors, then wrapped in stretch film for added stability.
Standard pallet dimensions are 1,100 mm × 1,100 mm, accommodating up to 500 kg of product per pallet.
For export shipments, fumigation‑free wooden pallets or plastic pallets are available upon request to comply with ISPM‑15 regulations.
To discuss your sports flooring project or request a sample, please reach out to our technical team.