This product combines a tournament‑grade netting assembly with a pair of portable posts designed for quick setup on indoor or outdoor badminton courts.
The net is constructed from high‑density polyethylene (HDPE) filament with a nominal diameter of 2.0 mm, a configuration that delivers a typical breaking load between 120 N and 180 N per strand and includes UV stabilizers for resistance to prolonged sun exposure.
Each post consists of a galvanized steel tube, 50 mm outer diameter with a 2.0 mm wall thickness, providing a yield strength around 250 MPa and a powder‑coat finish that meets ASTM B117 salt‑spray criteria for corrosion protection.
| Item | Specification | Typical Value / Option |
|---|---|---|
| Net Length | Official court width | 6.10 m (20 ft) |
| Net Height at Posts | Regulation height | 1.55 m (5 ft 1 in) at edges, 1.524 m (5 ft) at centre | Mesh Size | Square opening | 19 mm × 19 mm (standard) |
| Post Diameter | Outer tube | 50 mm |
| Post Height (adjustable) | Range | 1.5 m – 1.7 m |
| Base Weight | Stability requirement | 12 kg per post (sand or water fill) |

The posts feature a twist‑lock sleeve that receives the net’s top rope, allowing height adjustment without tools. A weighted base (sand or water) slides into a recessed socket on each post, providing a low‑center‑of‑gravity stance that resists lateral forces up to 150 N.
Assembly time for a typical court is under five minutes when two operators follow the illustrated quick‑start guide. The system is compatible with standard badminton court flooring surfaces, including synthetic PU, vinyl, and polished wood.
Facilities that require frequent court reconfiguration—such as community centers, school gymnasiums, and multi‑purpose sports halls—benefit from the system’s portability and rapid deployment.
Outdoor installations, including schoolyards and club grounds, rely on the UV‑stabilized netting and corrosion‑protected posts to maintain performance over seasonal temperature cycles ranging from ‑10 °C to +40 °C.
Because the net meets the Badminton World Federation (BWF) mesh‑size and tensile‑strength guidelines, the assembly can be used for sanctioned practice matches as well as recreational play.
Each net batch undergoes tensile testing on a representative sample of strands, with results recorded against the 120 N–180 N range to verify consistency.
Post tubes are inspected for wall thickness using ultrasonic gauges, and the powder‑coat adhesion is evaluated via cross‑hatch tape testing per ASTM D3359.
Final assembly checks include verification of net tension, post alignment, and base weight distribution before packaging.
Yes, the net length and height can be adjusted within the limits of the post’s travel range; special lengths are available upon request.
Please provide the required court size, preferred net color, post finish, and any optional accessories such as wind‑braces or custom branding.
Each unit receives a final inspection report that includes net tensile results, post dimensional checks, and coating adhesion scores.
Posts are nested in corrugated inserts, nets are rolled on cardboard cores with protective polyethylene wrap, and the entire kit is placed in a double‑wall box sealed with moisture‑resistant tape.
For detailed pricing, lead‑time estimates, or to discuss specific project requirements, please use the contact form below.
Request Quote