This product is engineered as a resilient sheet flooring system specifically tuned for the dynamic loads and slip‑resistance demands of indoor badminton play. It combines a homogeneous PVC wear layer with a reinforced backing to deliver consistent performance over thousands of impact cycles.
Supplied in continuous rolls, the flooring can be cut to court dimensions on‑site, minimizing seams and simplifying installation. The surface finish is calibrated to provide a controlled coefficient of friction that supports rapid lateral movements while reducing the risk of ankle strain.
| Parameter | Typical Value | Unit / Note |
|---|---|---|
| Overall Thickness | 4.5 | mm |
| Wear Layer Thickness | 0.7 | mm |
| Roll Width | 2.0 | m |
| Roll Length | 30 | m per roll |
| Weight | 2.8 | kg/m² |
| Dimensional Stability (ΔL/L) | ≤0.1 | % after 24h immersion |

The flooring consists of four bonded layers: a top PVC wear layer with embossed texture, a middle glass‑fiber reinforced PVC core for tensile strength, a lower PVC backing that provides adhesion to sub‑floor, and an optional UV‑stabilized coating that limits surface degradation under indoor lighting.
Badminton requires rapid directional changes, frequent lunges, and consistent ball bounce. The flooring’s defined coefficient of friction provides enough grip for shoe‑court interaction without causing excessive resistance that could impede speed. Its uniform thickness ensures a flat playing plane, which is critical for accurate shuttlecock trajectory and player safety.
Each roll undergoes inline thickness gauging, tensile strength sampling, and abrasion testing. Finished products are inspected for color consistency, emboss depth, and adhesion strength between layers. Documentation includes batch‑specific test reports and compliance certificates upon request.
Flooring is wound onto rigid cardboard cores, wrapped in polyethylene film, and placed on pallets. Standard pallet configuration holds 12 rolls (≈720 m²) fitting a 20‑ft container. Edge protectors and corner braces are added to prevent deformation during transit.
Yes, rolls can be slit to any width and cut to length on‑site, allowing seamless coverage of standard or non‑standard court dimensions.
Project area, desired thickness, wear‑layer preference, surface texture, color, and delivery destination enable an accurate price and lead‑time estimate.
Options include standard PVC, closed‑cell foam for acoustic dampening, and natural cork blends for enhanced comfort; each affects weight and thermal properties.
Every batch undergoes dimensional verification, wear‑layer thickness measurement, abrasion resistance testing, and adhesion peel tests; results are recorded in a test log attached to the shipment.
Rolls are secured with stretch film, placed on pallets with corner guards, and sealed in waterproof liner bags to guard against moisture and mechanical damage.
Lead time ranges from 15 to 25 working days after receipt of confirmed specifications and deposit, depending on order size and current plant load.
Sample sections (≈1 m × 1 m) can be shipped via express courier; the cost is credited toward the first order upon confirmation.
For technical data sheets, sample requests, or a formal quotation, please reach out via the contact form: Contact Us.