Opening: 9:00-5:00

China Badminton Court Mat For Sale Top Supplier

China Badminton Court Mat For Sale Top Supplier
China Badminton Court Mat For Sale Top Supplier
China Badminton Court Mat For Sale Top Supplier

China Badminton Court Mat For Sale Top Supplier

Inquire

In stock

A badminton court mat functions as the primary playing surface, delivering uniform ball rebound, adequate slip resistance, and cushioning to reduce joint stress during intense rallies. Manufacturers

Share this on:
China Badminton Court Mat For Sale Top Supplier

China Badminton Court Mat For Sale Top Supplier

China Badminton Court Mat for Sale – Technical Overview

A badminton court mat functions as the primary playing surface, delivering uniform ball rebound, adequate slip resistance, and cushioning to reduce joint stress during intense rallies.

Manufacturers in China typically construct these mats using a closed‑cell foam core laminated with a polymeric wear layer, allowing precise control over thickness, density, and surface texture.

The core material is often selected for its compression set resistance, ensuring the mat retains its original thickness after repeated impact cycles.

Material Composition and Construction

The top layer consists of a PVC or PU coating ranging from 1.0 mm to 2.0 mm thick, formulated to provide abrasion resistance and a consistent ball‑slide characteristic.

The wear layer is formulated with UV stabilizers to limit degradation under indoor lighting and occasional sunlight exposure.

Edge finishing options include heat‑sealed borders or PVC‑coated tape to prevent delamination and fraying at the mat’s perimeter.

Dimensional Standards and Tolerances

Parameter Typical Value Tolerance
Length 13.4 m (full court) ±10 mm
Width 6.1 m ±8 mm
Thickness 12 mm ±1 mm
Weight per m² 1.8 kg/m² ±0.15 kg/m²
Shore A hardness (top layer) 85 ±3
Coefficient of friction (wet) 0.55 ±0.05

Performance Characteristics

Ball rebound resilience is measured per ASTM F2117, with typical energy return ranging from 85% to 92% for the specified foam density.

Shock absorption, expressed as force reduction, usually falls between 45% and 55% at a 20 kg impact load, reducing peak forces transmitted to the athlete's lower limbs.

Abrasion resistance is evaluated using Taber wear tester; the mat typically shows less than 150 mg loss after 1000 cycles under a 500 g load.

Applications in Sports Facilities

  • Indoor badminton courts where consistent bounce and player safety are required.
  • Multi‑purpose sports halls that host badminton alongside other court games, benefiting from the mat’s modular roll‑out design.
  • Training centers and school gyms needing a portable surface that can be quickly installed and removed.
  • Temporary event venues such as exhibition halls where a quick‑set surface minimizes labor and downtime.

Customization Options

  • Thickness ranging from 8 mm to 20 mm to match specific performance requirements or sub‑floor conditions.
  • Surface color options including standard court green, blue, or custom Pantone matches for branding.
  • Surface texture variations such as fine‑grain for enhanced grip or smoother finish for faster ball speed.
  • Edge treatments: heat‑sealed, PVC‑taped, or beveled profiles to facilitate seamless joining of multiple rolls.
  • Optional logo printing or court line marking integrated into the wear layer during production.
china badminton court mat for sale top supplier

Quality Control and Testing

Each production lot undergoes thickness verification using laser micrometers at 100 mm intervals, ensuring the deviation stays within the specified tolerance.

Hardness is checked with a Shore A durometer on five random points per roll; results are logged and compared to the target range.

Abrasion resistance is validated by performing Taber wear tests on a sample cut from each batch, with acceptance criteria defined in the internal test protocol.

Final inspection includes visual examination for surface defects, edge integrity, and correct labeling before packaging.

Packaging and Logistics

Mats are rolled onto a rigid core with a protective polyethylene film to guard against moisture and surface scratches during transit.

Standard pallet configuration holds up to 12 rolls, each secured with stretch film and corner protectors for container loading.

Export shipments are typically arranged in 20‑foot or 40‑foot containers, with fumigation‑free pallets compliant with ISPM 15 when required.

Ordering Information

Minimum order quantity generally starts at one roll (≈13.4 m × 6.1 m) for stocked specifications; custom sizes may require a higher MOQ based on material setup.

Production lead time for standard configurations is approximately 15‑20 working days after receipt of confirmed purchase order and artwork, if applicable.

Samples can be provided upon request; sample rolls are usually cut to 1 m × 1 m and shipped via express courier at the buyer’s expense.

Frequently Asked Questions

Question Answer
Can the mat dimensions be customized? Yes, length, width and thickness can be adjusted to suit project requirements; tooling changes may affect MOQ and lead time.
What information is needed for a quotation? Required details include desired dimensions, thickness, surface color, texture, any logo or line marking, and delivery destination.
Which materials are available for the wear layer? Standard options are PVC and PU coatings; alternative formulations can be discussed for specific performance needs.
How is quality inspected before shipment? Each lot undergoes thickness, hardness, abrasion resistance, and visual checks per internal QC protocols before release.
What packaging options are offered? Mats are supplied rolled on cores with protective film; palletized or container‑loaded configurations are available upon request.
How are export shipments protected? Export loads use stretch film, corner protectors, and fumigation‑free pallets meeting ISPM 15 when required.
What is the typical production lead time? Standard configurations ship in 15‑20 working days; custom orders may extend to 25‑30 working days depending on complexity.
How are samples arranged? Sample rolls of 1 m × 1 m can be sent via express courier; freight charges are typically borne by the requester.

Contact for Inquiry

For technical details, customization requests, or a formal quotation, please reach out via the contact form.

Contact Us