Indoor volleyball courts demand flooring that delivers reliable traction, shock absorption, and long‑term wear resistance under frequent impact. Bulk floor mats satisfy these requirements while enabling rapid installation and straightforward replacement across expansive playing surfaces.
Each mat consists of a closed‑cell ethylene‑vinyl acetate (EVA) foam core bonded to a durable PVC surface layer. Core thickness options range from 12 mm to 20 mm, selected according to the desired level of impact attenuation. The PVC wear layer typically measures 0.8 mm thick and exhibits a surface density of approximately 1.2 g/cm³.
Impact attenuation evaluated per ASTM F355 typically shows a 30 % to 45 % reduction in peak force relative to bare concrete. Coefficient of friction measured under both wet and dry conditions remains between 0.6 and 0.8, satisfying indoor sports safety guidelines.
These mats are commonly installed in school gymnasiums, community recreation centers, and professional training venues where multiple courts are arranged side‑by‑side. The modular configuration permits facility personnel to replace isolated worn sections without shutting down the entire floor, thereby cutting downtime and maintenance expense.
Buyers may specify core thickness, surface hue, and edge detailing to align with visual branding or functional needs. Custom logo printing can be applied to the PVC face using UV‑cured inks that resist abrasion and fading.

Every production batch undergoes dimensional verification (±1 mm tolerance) and hardness assessment (Shore A 80±5). Visual inspection examines surface integrity, color consistency, and proper interlock engagement. Test certificates can be supplied on request.
Mats are stacked on pallets with interleaving polyethylene sheets to avoid surface abrasion. A typical pallet accommodates 50 units of 1 m × 1 m size. Export consignments receive shrink‑wrap protection and corner guards to satisfy ISPM‑15 standards.
Standard stock items normally ship within 5–7 business days after order confirmation. Custom‑specified mats generally require 10–15 business days, depending on thickness selection and surface finish.
Yes. Length and width can be altered in 10 mm increments; non‑standard geometries are offered as made‑to‑order.
What information is required before quotation?Necessary details include total area to be covered, preferred thickness, surface color, edge treatment, and any logo or marking specifications.
How is quality inspected?Each lot is subjected to dimensional checks, hardness testing, and visual examination per the internal QC protocol; test reports are provided upon request.
For additional information or to submit a quote request, please reach out to our technical sales team.
Contact Us