The tiles are produced from isotactic polypropylene copolymer, selected for its balance of rigidity and impact resistance. Each unit measures 250 mm × 250 mm with a nominal thickness of 15 mm, providing a stable playing surface while allowing for thermal expansion. Manufacturing takes place in a dedicated extrusion and compression molding line that maintains tight dimensional tolerances within ±0.2 mm.
The polypropylene base contains a 5 % ethylene‑propylene rubber modifier to improve low‑temperature toughness down to –20 °C. UV stabilizers (hindered amine light absorbers) are added at 0.3 % to retain color stability under outdoor exposure for at least 3 years. Density of the compound is approximately 0.90 g/cm³, yielding a tile weight of about 0.85 kg per piece.
Each tile features a male‑female edge system with a 10 mm overlap and a 2 mm chamfer to facilitate quick assembly without adhesives. The interlock provides a shear resistance of approximately 0.8 MPa, sufficient to prevent lateral movement under typical sports loads. A recessed drainage channel (3 mm deep) runs along the perimeter to allow water runoff and reduce slip risk.
| Property | Typical Value | Test Method |
|---|---|---|
| Compressive Strength | 2.5 MPa | ASTM D695 |
| Flexural Modulus | 1.1 GPa | ASTM D790 |
| Coefficient of Friction (wet) | 0.55 | ASTM E303 |
| Thermal Expansion (linear) | 1.2×10⁻⁴ / °C | ASTM D696 |
| UV Color Change (ΔE) | <5 after 1000 h | ISO 4892‑2 |

Production follows a statistical process control plan with in‑line monitoring of melt flow index (±0.05 g/10 min) and density (±0.002 g/cm³). Finished tiles undergo random sampling for dimensional checks, compressive strength, and UV resistance before shipment. All inspection records are retained for traceability per customer request.
Tiles are stacked in layers of 20 pieces, separated by corrugated cardboard sheets, and placed on pallets sized 1.1 m × 1.1 m. Each pallet holds approximately 480 tiles, with a gross weight of about 420 kg. Stretch film wrapping and corner protectors secure the load for containerized shipment, and a humidity‑desiccant packet is included to prevent moisture absorption during transit.
Yes, tile length and width can be adjusted in 25 mm increments, and edge profiles can be modified to suit irregular perimeters, subject to tooling lead time.
Project details such as total area, desired thickness, color preference, surface texture, and delivery destination enable an accurate cost estimate.
Pallets are wrapped with UV‑stabilized stretch film, edge boards are added, and containers are loaded with proper ventilation to avoid condensation.
For further details on material specifications, customization, or to request a sample kit, please contact our technical team.
Submit Inquiry