Opening: 9:00-5:00

Bulk Outdoor Pickleball Basketball Court Tiles Supplier

Bulk Outdoor Pickleball Basketball Court Tiles Supplier
Bulk Outdoor Pickleball Basketball Court Tiles Supplier
Bulk Outdoor Pickleball Basketball Court Tiles Supplier

Bulk Outdoor Pickleball Basketball Court Tiles Supplier

Inquire

In stock

The tiles are engineered as interlocking units that create a seamless playing surface without adhesives or specialized fasteners. Each unit features a tapered edge system that locks laterally and

Share this on:
Bulk Outdoor Pickleball Basketball Court Tiles Supplier

Bulk Outdoor Pickleball Basketball Court Tiles Supplier

Bulk Outdoor Pickleball Basketball Court Tiles Supplier

Purpose‑Built Modular Surfacing

The tiles are engineered as interlocking units that create a seamless playing surface without adhesives or specialized fasteners. Each unit features a tapered edge system that locks laterally and vertically, allowing the court to accommodate thermal expansion while maintaining a uniform plane. This design reduces installation time and eliminates common failure points associated with poured-in-place coatings.

Material Composition

Base resin is a UV‑stabilized copolymer polypropylene blended with impact modifiers and mineral fillers to increase stiffness and abrasion resistance. The additive package includes hindered amine light stabilizers (HALS) to retard photo‑oxidation and a pigment system that meets ASTM D2244 colorfastness standards after 2000 hours of Xenon‑arc exposure. Optional recycled content can be incorporated up to 15 % by weight without compromising mechanical performance.

Key Mechanical Properties

Typical values per tile (500 mm × 500 mm × 12 mm) are: compressive strength 22 MPa, flexural modulus 1.8 GPa, and Shore A hardness 85. The surface texture yields a wet coefficient of friction of 0.62, satisfying both pickleball slide requirements and basketball traction guidelines. Thermal expansion coefficient is approximately 6 × 10⁻⁵ / °C, allowing seamless operation from –20 °C to +60 °C.

Installation Methodology

A compacted gravel base (minimum 100 mm thickness) topped with a leveling sand layer provides drainage and load distribution. Tiles are laid by hand, pressing each unit into the neighboring interlocks; a rubber mallet may be used to ensure full engagement. No curing time is required, and the surface is ready for immediate use. Edge trim pieces are snapped into place to prevent lateral movement and to provide a finished perimeter.

Application Suitability for Dual‑Sport Courts

Pickleball demands a low‑bounce, consistent surface with minimal shoe wear, while basketball requires impact absorption and lateral stability. The modular tile’s calibrated deflection (approximately 1.2 mm under a 500 N point load) provides the energy return needed for pickleball volleys and the shock attenuation desirable for jump landings. Integrated drainage channels prevent water accumulation, preserving playability after rain and reducing slip hazards.

Quality Assurance Protocols

Each production lot undergoes dimensional inspection (±0.5 mm tolerance), melt flow index testing, and accelerated weathering per ASTM G154. Finished tiles are subjected to a static load test (2 kN for 10 minutes) with zero permanent deformation recorded. Documentation includes material certificates, test reports, and traceability codes laser‑etched on the underside of each unit.

Customization Options

Thickness can be adjusted from 10 mm to 20 mm to meet specific load or cushioning requirements. Color matching is available for corporate or institutional branding, with pigments dispersed uniformly throughout the matrix to avoid surface wear variations. Logos or court markings can be embedded via recessed inserts that sit flush with the tile face, preserving the interlocking geometry.

bulk outdoor pickleball basketball court tiles supplier

Packaging and Logistics

Tiles are stacked in layers separated by corrugated sheets and secured on heat‑treated pallets (max load 1.2 t). Stretch film and corner boards protect against moisture and impact during transit. For container shipments, a standard 20‑foot GP accommodates approximately 2600 tiles (≈ 15 m³), allowing efficient bulk delivery to project sites worldwide.

Frequently Asked Questions

Can dimensions be customized?

Yes, length and width can be adjusted in 50 mm increments to suit unique layout constraints, while maintaining the interlocking profile.

What information is required before quotation?

Project area, desired thickness, color preference, any logo or marking details, and destination port for freight estimation.

What materials are available?

Standard UV‑stabilized polypropylene copolymer, optional recycled‑content blends, and specialty additives for enhanced UV or anti‑static properties.

How is quality inspected?

Incoming raw material checks, in‑process melt flow verification, and final lot testing for dimensions, load resistance, and weathering performance.

What packaging methods are available?

Palletized with interlayer protection, bulk‑bag options for loose tiles, and custom crating for high‑value logo‑inserted units.

How are export shipments protected?

Tiles are wrapped in UV‑stable polyethylene film, placed on fumigated pallets, and secured with straps to prevent movement during ocean transit.

Get a Technical Quote

Submit your project specifications through the contact form to receive a detailed cost breakdown, lead‑time estimate, and sample tile availability. Our engineering team will review the requirements and respond within one business day.

Request Quote