Opening: 9:00-5:00

Bulk Backyard Basketball Sport Court Tiles Supplier

Bulk Backyard Basketball Sport Court Tiles Supplier
Bulk Backyard Basketball Sport Court Tiles Supplier
Bulk Backyard Basketball Sport Court Tiles Supplier

Bulk Backyard Basketball Sport Court Tiles Supplier

Inquire

In stock

Backyard basketball courts require a surface that balances playability with durability under frequent impact and weather exposure. Modular sport court tiles provide a quick‑install, interlocking

Share this on:
Bulk Backyard Basketball Sport Court Tiles Supplier

Bulk Backyard Basketball Sport Court Tiles Supplier

Bulk Backyard Basketball Sport Court Tiles Supplier

Backyard basketball courts require a surface that balances playability with durability under frequent impact and weather exposure.

Modular sport court tiles provide a quick‑install, interlocking solution that can be laid over existing concrete or compacted base.

Each tile is manufactured from virgin polypropylene copolymer, selected for its high impact resistance and low temperature brittleness.

Standard thickness is 20 mm, delivering a compressive strength of approximately 1 200 kN/m² when tested per ASTM D695.

The interlocking system uses a male‑female dovetail edge that engages with a shear load capacity of 3.5 kN per joint.

Performance is evaluated through several standardized tests that reflect real‑world court conditions.

  • Shock absorption measured at 30 % reduction in peak force compared to bare concrete (ASTM F355).
  • Vertical deformation under a 500 kg load remains below 2 mm, ensuring consistent ball bounce.
  • Coefficient of friction (wet) is 0.62, meeting slip‑resistance requirements for sports surfaces (EN 13036‑4).
  • UV stabilization retains >90 % of original color intensity after 2 000 hours of xenon‑arc exposure (ASTM G155).

A backyard basketball court experiences repetitive jumping, lateral cuts, and occasional equipment impacts, all of which generate localized stress concentrations.

The modular tile system distributes loads across the interlocking grid, provides drainage channels to prevent water pooling, and allows individual tile replacement without resurfacing the entire area.

Every production lot undergoes random sampling for impact strength, dimensional stability, and colorfastness according to ISO 9001‑based procedures.

Test results are recorded and traceable, enabling suppliers to provide material certificates upon request.

Buyers can tailor the tiles to specific site aesthetics and performance needs.

  • Standard colors include safety orange, court blue, and forest green; custom Pantone matches are available.
  • Surface logos or court markings can be embedded via in‑mold printing with abrasion‑resistant overcoat.
  • Thickness options range from 15 mm for light‑duty play to 25 mm for high‑impact installations.
  • Edge profiles can be supplied with beveled or squared finishes to match surrounding hardscaping.
bulk backyard basketball sport court tiles Supplier
Property Value (Typical)
Material Virgin polypropylene copolymer
Thickness 20 mm (customizable 15‑25 mm)
Compressive Strength 1 200 kN/m² (ASTM D695)
Shear Load per Joint 3.5 kN (ASTM F355)
UV Stability >2 000 h xenon‑arc, >90 % color retention (ASTM G155)
Slip Resistance (wet COF) 0.62 (EN 13036‑4)
Service Temperature ‑30 °C to +60 °C
Request a Quote