Interlocking tile systems provide a modular surface that can be installed over existing concrete or compacted aggregate to create a durable, low‑maintenance playing area. For basketball driveways, the surface must support repeated ball impact, provide consistent traction, and resist weathering without cracking or delamination.
Each tile measures 300 mm × 300 mm with thickness options ranging from 15 mm to 25 mm. The nominal weight per tile varies between 0.9 kg and 1.4 kg depending on material and thickness, allowing easy handling during installation while providing sufficient mass to resist lateral movement under load.
Tiles are manufactured from polypropylene copolymer blends or recycled rubber compounds, both enhanced with UV stabilizers and anti‑oxidant additives. Typical tensile strength for the polypropylene grade exceeds 25 MPa, while the rubber blend offers a Shore A hardness of 60‑70, providing a balance of rigidity and impact absorption.
A male‑female snap‑fit mechanism engages along all four edges, creating a continuous shear‑resistant joint. Laboratory testing shows a typical compressive strength of 150 kN/m² and an impact attenuation value of 30 % when measured according to ASTM F1292, indicating effective energy reduction during ball bounce and player landings.
A stable sub‑base of compacted crushed stone (minimum 100 mm depth) topped with a 20 mm layer of sharp sand provides leveling and drainage. Tiles are placed by hand, snapped together, and cut with a standard utility knife to fit perimeter constraints; no adhesives or fasteners are required.
Surface cleaning can be performed with a broom or low‑pressure water jet; the material resists staining from oil, grease, and common sports drinks. UV stabilization extends color retention to typically five years under direct sunlight, and the interlock design accommodates thermal expansion without joint failure.
Each production batch undergoes dimensional inspection (±0.5 mm tolerance), compressive strength testing per ASTM D695, and accelerated UV exposure (1000 hours) to verify color stability. Test reports are available upon request.
The consistent ball rebound and shock‑absorbing characteristics make these tiles suitable for residential basketball driveways, school playgrounds, and multi‑use recreational courts. The modular nature allows rapid reconfiguration or expansion without disrupting the existing substrate.
| Attribute | Typical Value / Customizable |
|---|---|
| Tile Size | 300 mm × 300 mm |
| Thickness | 15 mm – 25 mm (customizable) |
| Material | Polypropylene copolymer or recycled rubber blend |
| Interlock Type | Male‑female snap‑fit on all edges |
| Compressive Strength | ≈150 kN/m² (ASTM D695) |
| Impact Attenuation | ≈30 % (ASTM F1292) |
| Temperature Range | ‑20 °C to +60 °C |
| Water Drainage Rate | >150 mm/hr (with perforations) |
| Weight per Tile | 0.9 kg – 1.4 kg |
| Color Options | Standard colors; custom pigments available |
| Surface Texture | Smooth or raised‑dot anti‑slip |