Vinyl wood grain sports flooring combines a resilient polyvinyl chloride (PVC) core with a high‑resolution photographic layer that replicates natural timber aesthetics. The construction provides a seamless surface that meets the mechanical demands of indoor sports while offering the visual warmth of wood.
The product is built from three primary layers: a transparent wear layer, a printed decorative film, and a PVC backing. The wear layer thickness typically ranges from 0.3 mm to 0.7 mm, directly influencing abrasion resistance. The decorative film uses a wood‑grain print that is UV‑stabilized to prevent fading under indoor lighting. The backing provides dimensional stability and is often reinforced with a fiberglass scrim to limit expansion and contraction.
Key performance indicators for sports flooring include shock absorption, vertical deformation, slip resistance, and wear resistance. Typical values for a 5 mm total thickness product are: shock absorption ≥ 25 %, vertical deformation ≤ 2.3 mm, slip resistance (pendulum test) ≥ 0.5, and abrasion loss ≤ 0.02 g per 1000 cycles under EN 14904.
| Property | Typical Value | Test Standard |
|---|---|---|
| Shock Absorption | ≥ 25 % | EN 14904 |
| Vertical Deformation | ≤ 2.3 mm | EN 14904 |
| Slip Resistance (Pendulum) | ≥ 0.5 | EN 13036‑4 |
| Abrasion Loss | ≤ 0.02 g/1000 cycles | EN 649 |

The combination of impact attenuation and consistent surface friction makes vinyl wood grain flooring suitable for multi‑purpose halls where basketball, volleyball, badminton, and fitness activities occur. The wood‑grain appearance satisfies aesthetic requirements for dance studios and martial arts dojos, while the seamless installation reduces trip hazards compared to interlocking tiles.
Manufacturing includes inline thickness gauging, wear layer adhesion testing, and periodic off‑line sample evaluation for dimensional stability after 24 h humidity conditioning. Each batch is subjected to a full EN 14904 compliance check before release, ensuring that shock absorption and slip resistance meet the declared tolerances.
Flooring is supplied in rolls up to 20 m length, wrapped in protective polyethylene film and placed on sturdy cardboard cores. Rolls are stacked on pallets with corner protectors and secured with stretch film to prevent shifting during container transport. Standard pallet dimensions accommodate 20‑ft and 40‑ft containers, facilitating direct shipment to project sites.
Yes. Overall thickness, wear layer, and roll width can be adjusted according to project specifications. Custom lengths are available upon request, subject to minimum order quantities.
Required details include the intended sports activity, floor area, desired thickness, wear layer preference, and any specific aesthetic pattern. Sub‑floor condition and expected load levels also influence the technical recommendation.
In‑line monitoring tracks thickness and wear layer adhesion. Final inspection includes a random sample tested for shock absorption, slip resistance, and abrasion loss per EN standards. Test reports are provided with each shipment.
For detailed datasheets, sample requests, or project‑specific engineering support, please reach out via the contact form.
Request Technical Information