Indoor sports courts require a surface that balances traction, shock absorption, and durability under repeated athletic loads. Polyvinyl chloride (PVC) formulations designed for court use incorporate a reinforced wear layer, a foamed backing for impact attenuation, and a surface texture engineered to meet sport‑specific friction coefficients.
When sourced in bulk from a dedicated factory, the flooring can be produced to consistent thickness tolerances, enabling seamless installation across large facilities such as gymnasiums, multi‑purpose halls, and training centers.
The core structure consists of three primary layers:
Additives include phthalate‑free plasticizers, calcium‑zinc stabilizers, and pigments dispersed to achieve consistent color throughout the thickness, eliminating surface‑only fading.
| Property | Typical Range | Test Standard |
|---|---|---|
| Shock absorption (vertical deformation) | 2.5 mm – 3.5 mm | EN 14808 |
| Coefficient of friction (dry) | 0.55 – 0.75 | EN 13036‑4 |
| Abrasion resistance (weight loss) | ≤ 0.08 g/1000 cycles | EN ISO 5470‑1 |
| Fire rating | Bfl‑s1 (EN 13501‑1) | EN 13501‑1 |
| VOC emission | ≤ 0.5 mg/m³ | ISO 16000‑9 |
The flooring is supplied in rolls or tiles with a pre‑applied pressure‑sensitive adhesive backing. Substrate preparation is critical: concrete must be flat to ≤ 3 mm over a 2 m straightedge, clean, dry, and free of laitance.
Acclimatization of the material to the installation environment for at least 24 hours at 18 °C–22 °C reduces post‑installation expansion or contraction.
Seams are welded using hot‑air welding equipment set to 260 °C–280 °C, producing a continuous, watertight surface that maintains the specified shock‑absorption values across the joint.
Because the surface friction can be tuned within the 0.55–0.75 range, the flooring satisfies the requirements of basketball, volleyball, badminton, and multipurpose training areas where lateral movement and sudden stops are frequent.
The shock‑absorption layer mitigates impact stress on joints, making the floor suitable for weight‑training zones and aerobic studios where repetitive loading occurs.
In addition, the low VOC emission and fire‑rating compliance allow installation in schools, community centers, and corporate wellness facilities without additional fire‑retardant treatments.
Each batch undergoes inline thickness monitoring with laser gauges, maintaining a tolerance of ± 0.1 mm across the wear layer and ± 0.2 mm for the foam core.
Finished rolls are subjected to a 100 mm abrasion test (EN ISO 5470‑1) and a pendulum friction test (EN 13036‑4) before release; results are recorded and available upon request.
Visual inspection checks for color uniformity, surface defects, and edge straightness, with a defect acceptance limit of ≤ 0.5 % of total area.
Thickness of the wear layer can be adjusted from 0.6 mm to 1.5 mm to suit higher‑traffic venues, while the foam core thickness can be varied between 3 mm and 8 mm to achieve specific shock‑absorption targets.
Surface embossing patterns—such as fine‑grain, medium‑grain, or cross‑hatch—are available to modify the coefficient of friction without altering the base formulation.
Color matching to corporate or team palettes is performed using a spectrophotometer, ensuring ΔE < 2 between the sample and the production run.
Can dimensions be customized? Yes, roll width, tile size, and thickness are adjustable according to project specifications; consult technical sales for exact limits.
What information is required before quotation? Required details include intended sport(s), area dimensions, substrate condition, desired performance levels (shock absorption, friction), and any color or branding requirements.
How is quality inspected? Inline dimensional checks, abrasion and friction testing, and visual inspection are performed on every batch; test certificates are provided with shipment.
What packaging methods are available? Rolls are wrapped in polyethylene film and placed on cardboard cores; tiles are stacked in pallets with corner protectors and stretch‑film wrapping.
For technical datasheets, sample requests, or to discuss a bulk order, please contact our engineering team.
Request a Quote