OEM Basketball Court Sticky Floor Mats Supplier
Sticky floor mats for basketball courts are designed to remove loose particles from shoe soles during gameplay. The mat consists of a pressure‑sensitive adhesive layer laminated to a reinforced polyethylene backing.
Material Composition
The mat consists of three primary layers: a low‑tack pressure‑sensitive adhesive (PSA) on the top surface, a polyethylene terephthalate (PET) release liner that protects the adhesive before installation, and a high‑density polyethylene (HDPE) backing that provides dimensional stability and resistance to tearing.
Performance Characteristics
Key performance indicators include adhesive peel strength, mat thickness, and slip resistance under wet and dry conditions.
- Adhesive peel strength: typically 0.2–0.5 N/cm measured according to ASTM D903.
- Overall thickness: 1.4 mm ± 0.1 mm, comprising 0.2 mm adhesive layer and 1.2 mm backing.
- Slip resistance: coefficient of friction (COF) ≥ 0.6 on dry concrete and ≥ 0.4 on wet surfaces when tested per ASTM F1677.
Customization Options
OEM buyers can specify dimensions, adhesive formulation, backing color, and edge treatment to match facility requirements.
- Length: 0.5 m to 30 m (rolls) or custom‑cut tiles up to 1 m × 1 m.
- Width: 0.3 m to 1.5 m.
- Adhesive tack level: low (0.1–0.2 N/cm), medium (0.2–0.4 N/cm), high (0.4–0.6 N/cm).
- Backing color: standard gray, black, or custom Pantone match.
- Edge finish: straight cut, heat‑sealed hem, or perforated for easy separation.
Applications in Sports Facilities
Sticky mats are placed at court entrances, player benches, and locker‑room transitions to capture contaminants before they reach the playing surface. By reducing dust and moisture transfer, the mats help maintain consistent ball bounce and lower the risk of slips caused by foreign particles.
- Indoor basketball courts (school gyms, collegiate arenas, professional venues).
- Multi‑purpose sports halls where foot traffic changes between activities.
- Training facilities that require frequent shoe changes.
Quality Assurance and Testing
Each production lot undergoes inline inspection for adhesive uniformity, backing thickness, and visual defects. Finished mats are sampled for peel strength and COF to verify compliance with the agreed specification.
Technical Specifications
| Property |
Typical Value |
Unit |
| Adhesive peel strength |
0.2 – 0.5 |
N/cm |
| Overall thickness |
1.4 ± 0.1 |
mm |
| Slip resistance (COF, dry) |
≥ 0.6 |
– |
| Slip resistance (COF, wet) |
≥ 0.4 |
– |
| Operating temperature range |
‑10 to +50 |
°C |
Frequently Asked Questions
- Can dimensions be customized? Yes, length, width, and thickness can be adjusted to suit specific court layouts.
- What information is required for a quotation? Required details include desired dimensions, adhesive tack level, backing color, quantity, and delivery destination.
- What materials are available for the backing? Standard options are high‑density polyethylene (HDPE) and polypropylene (PP); other polymers can be evaluated upon request.
- How is quality inspected? Inline thickness gauges, adhesive peel testers, and slip‑resistance devices are used; batch samples are retained for traceability.
- What packaging methods are available? Mats are rolled on cardboard cores with protective polyethylene film or packed flat in corrugated cartons, depending on length.
- How are export shipments protected? Palletized with corner guards, stretch‑wrapped, and placed in moisture‑barrier bags to prevent adhesive degradation.
- What is the typical production lead time? Lead time ranges from 2 to 4 weeks for standard specifications; custom formulations may extend this period.
- How are samples arranged? Sample rolls (up to 5 m length) can be dispatched upon receipt of a formal request and approval of sample costs.
Contact for Inquiry
To discuss OEM requirements, request a quotation, or obtain technical datasheets, please reach out via the contact form.
Send Inquiry